Views: 1 Author: Site Editor Publish Time: 2018-10-22 Origin: Site
In the process of using the nail making machine, it is inevitable that such problems will occur. Once the nailing machine has problems, it will affect normal production. If we want to guarantee the quality of the nails, we need to master the method of handling the nailing machine. Let's take a look at the common solutions to the problems of traditional nailing machines.
In the process of using the nail making machine, it is believed that some users will encounter the problem of the country: the product produced has the problem of cracking of the nail tip. If this happens, then we should shut down the equipment in time, then replace the wire, or re-fire the wire to produce new wire, and clean the garbage in the garbage tank to prevent garbage mixing. The problem.
Another common problem is that the nails produced have a certain degree of inclination. The reason is probably due to the deviation of the degree of wear of the blade, which leads to the situation of uncoordinated left and right when making the nail. At this time, we need to re-grind the blade in time, and adjust the operating height and reasonable position of the casing to ensure the normal operation of the nail making machine.
Of course, there may be other problems when actually doing the work. Regardless of the situation, we need to find out the specific reasons first, and then deal with them according to the actual situation. This will ensure that the nailing machine maintains a normal working condition and better implements the nailing operation.
If you want to completely solve the problems in the production process of traditional nail making machine, we recommend using our high-speed nail making machine. Our nail making machine effectively solves the problem of long and short nails, partial caps and nail caps, aircraft heads and hoes. The quality of nails and nails is limited by the structural limitations of traditional nail making machines and the technical level of nailing machines, and the high rate of defective products.