Views: 7 Author: Site Editor Publish Time: 2019-01-25 Origin: Site
The UN-3 butt welder is made of a full copper wire package with stable performance and long service life. The welding diameter is: carbon 1.5-4.0MM, copper wire 1.5-2.5MM, aluminum wire 1.5-3.5MM. It is a powerful tool for wire and cable, wire drawing, wire products, wire products, wire mesh and other industries. The UN-5 butt welder is made of a full copper wire package with stable performance and long service life. The welding diameter is: carbon steel 1.5-6.5 MM, copper wire 1.5-4.0 MM, aluminum wire 2.0-6.5MM. It is a powerful tool for wire and cable, wire drawing and nail making, wire products, wire products, wire mesh, cement products and other industries. The combined welder itself has a grinder that facilitates the removal of burrs from welding. The screw welder has a strong tightening force and is especially suitable for welding high carbon steel. Microcomputer controlled welding current and welding time can be precisely adjusted. The reliability of the welded workpiece and the long service life of the machine are guaranteed.
UN-5W type butt welding machine is mainly composed of single-phase welding transformer, welding fixture, machine base, single-chip microcomputer controller and electrical configuration. Both the welding current and the welding time can be precisely adjusted. The reliability of the welded workpiece and the long service life of the machine are guaranteed. The welding diameter is: carbon steel 1.5-6.5MM, copper wire 1.5-4.0MM, aluminum wire 2.0-6.5 MM. It is a powerful tool for wire and cable, wire drawing nails, wire products, wire products, wire mesh, cement products and other industries. The combined welder itself has a grinder that facilitates the removal of burrs from welding. The screw welder has a strong tightening force and is especially suitable for welding high carbon steel.
UN-20 type butt welding machine is specially made according to the requirements of the current customers to weld low-oxygen copper rods with a diameter of 8mm. It has the effect of welding copper rods and saving electricity. Its structure is mainly composed of single-phase welding transformer, welding fixture (both eccentric and spiral), fuselage and electrical configuration. (Use and maintenance refer to other instructions of UN series, the appearance is the same as UN-16 type.) Welding diameter: low carbon steel 5-15mm, copper 4-8.5mm, aluminum 6-14mm. UN-25 type butt welder is made of all-copper wire package with stable performance and long service life. The diameter is: carbon steel 6-18 MM, copper wire 6-8 MM. Aluminum wire 8-14 MM. It is a powerful tool for wire and cable, wire drawing and nail making, wire products, wire products, wire mesh, cement products, construction sites, snow chains, and other industries.
The UN-30 link special butt welder consists of a welding transformer made of copper winding and a mechanical clamp. The welding current can be adjusted to ensure the reliability of the welded workpiece and the long service life of the machine. It is used for welding links of low carbon steel with a diameter of 7mm or less. The UN-75 butt welder is made of a full copper wire package with stable performance and long service life. Welding 60-600 square millimeters of low carbon steel. It is a powerful tool for wire and cable, wire drawing and nail making, wire products, wire products, wire mesh, cement products, construction sites, and anti-skid chain manufacturing industries. The UN-100 butt welder is made of a full copper wire package with stable performance and long service life. Maximum welding of 1000 square millimeters of low carbon steel. It is a powerful tool for wire and cable, wire products, wire products, wire mesh, cement products, construction sites, snow chains, and other industries.
The DN-5W spot welder is a welding transformer made of all-copper windings, which is composed of a single-chip microcomputer control system and mechanical fixtures. The welding current and welding time can be precisely adjusted to ensure the reliability of the welded workpiece and the long service life of the machine. DN-10 spot welder, made of copper wire package, has stable performance and long service life. The spot welding time is controlled by digital time relay with an accuracy of 0.01 seconds. The welding quality is more stable and so on. Welded low carbon steel plate thickness: rated 0.3+0.3--1.5+1.5MM. Maximum 2+2MM. Widely used in wire and cable, metal cabinet manufacturing, steel furniture, kitchen equipment, and other manufacturing industries. DN-16 spot welder welding, made of copper wire package, stable performance, long service life, spot welding time controlled by digital display time relay, accuracy of 0.01 seconds. The welding quality is more stable and so on. Welded low carbon steel plate thickness: rated 0.5+0.5--2.0+2.0MM. Maximum 3+3MM. Widely used in wire and cable, metal cabinet manufacturing, steel furniture, kitchen equipment, and other manufacturing industries. DN-25 spot welding machine, made of copper wire package, has stable performance and long service life. The spot welding time is controlled by digital time relay with an accuracy of 0.01 seconds. The welding quality is more stable and so on. Welded low carbon steel plate with a maximum thickness of 4+4 MM. Widely used in wire and cable, metal cabinet manufacturing, steel furniture, kitchen equipment, and other manufacturing industries.
